<<  back

Ecologically and environmentally friendly non toxic Antifreeze and secondary refrigerant for Process Cooling & AC systems. Based on refined vegetable extracts and ASTM D1384 proven corrosion, scale and biological inhibitors.

ECO2: Vegetable Based Antifreeze has been especially formulated to provide Refrigeration and AC plant operators with a secondary refrigerant Antifreeze that is 100% renewable i.e. not derived from non-renewable crude oil.

ECO2: Vegetable Based Antifreeze is a clear, slightly viscous liquid and mildly sweet to the taste. It is non-pungent however it does have a characteristic aroma.

Density:	1.02 - 1.26 g/cm3
pH:	7.5 - 10.5 depending on inhibitors
Boiling Point:	>100 °C

As per BSRIA guide BG 29/2012 all pipework systems should be clean and free from biological contamination and debris prior to commissioning. To minimse corrosion, air ingress should be minimised. A pressurised system is best.

Determine the total system volume and add ECO2: Vegetable Based Antifreeze to the system according to the minimum operating temperature required (see table below).

The minimum dose of ECO2: Vegetable Based Anti freeze should not be less than 25% of the system volume and the maximum does not normally exceed 60%. We recommend the use of deionised, distilled or UltraPure™ water for this dilution. Avoid water containing high levels of calcium salts or chlorides [CI-].

When measuring the percentage concentration of ECO2: Vegetable Based Anti freeze in solution we recommend the use of a recently calibrated refractometer.

Please refer to the associated product Safety Data Sheet which is available on request.

3 years when stored in sealed containers out of direct sunlight.

25, 205 & 1000 Litre IBC’s and bulk tankers.

ECO2: Vegetable Based Antifreeze can also be supplied as a ready-to-use solution.

Frost Protection °C	V/V of ECO2: VB Anitifreeze	Refractive Index
-10	25%	1.355
-15	33%	1.362
-20	38%	1.367
-25	43%	1.372
-30	48%	1.377
-35	52%	1.380

BDIC strive to ensure end users and distributors receive the full benefit of working with a specialist supplier that offers:

• Expert Technical advice on all aspects of fluid selection, including Environmental Impact Assessments, Thermal Performance etc
• Fluid Maintenance Programs for the proactive verification of fluid and system condition
• A vast stock inventory facilitating same day dispatch and delivery
• Bespoke formulations for specialist applications.